Jump to content

The new ride


Cando

Recommended Posts

STU wrote:

What prop are you running and has it helped the performance what is your top speed you are getting

I'm running a solas 21p new santurn as mec are still trying to get me a lazzer 22p.. I moved the lecy batt to the back left side and I lifted the motor 1 hole, so now the cav plat is about 15mm above the bottom of the boat, but at wot and trimmed out the water is level with the plat.. With a full load 2 (100kg's each)fishing gear, livewell&fuel full My best speed is 75 @ 5500rpm GPS.. also I'm running a small cav plat...

Are you sure its an upgrade. It old girl is awesome

shortie, You don't have to tell me mate,,,, The old girl was awesome.. But it hasn't got anything on the new boat :) And the thing I'm still getting over is how cheap the 90 op'ie is to run :ohmy: As cheap as the 40 yammie.....

Link to comment
Share on other sites

looks very nice nole mate hows is it all running did you keep it on that top hole i was talking to theo he said your new prop is not to far away i also talkrd to the owner of blue fin he said that prop might take you to 80 km angus my boat is about to come up for sale if you are intersted in a tomcat

Link to comment
Share on other sites

I think dan gets about the same in his tomcat with jacking plate and laser 22p I have the laser 20p and get 82km but thats with the 115hp opti I tried dans 22p on it and it didnt rev out so I would have to adjust foot pedal bolt cause I couldnt put the foot down any more so I think I could get a few more kms but Im happy with its performance threw out from start to finish not bothered on any more top speed its quick enough for now.

Link to comment
Share on other sites

here is a site mite help with the gobbledebollox,,, :)

http://www.marinepartsman.com/installing-an-outboard-on-your-boat.html#Determining%20the%20Recommended%20Outboard%20Mounting%20Height

http://sites.mercurymarine.com/portal/page?_pageid=126,48572,126_49291:126_49299&_dad=portal&_schema=PORTAL

Just trying to get the most we can out of the motors/boats.. diffrecne pich porp's i.e. 3or 4 or 5 blade for diffrence needs.. For me top end speed with a avg holeshot is more inportant then, lets say toing a tube so on..

No much help i guess lol ;)

Link to comment
Share on other sites

it was crap before i moved the lecy batt to the left rear side now it alot better on the plan the it's flat... They installed the start batt right behind the driver :( I'd go side agian any day, just have a lot more input to the setup..

Noel

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...