sold Large bait board $50

[rayke1938]

For sale one large BLA bait board it is 1270 long overall and the bait board tray is 870 by 500. It has 2 rod holders on each end and is unsuitable for my boat. I have to have it mounted too high to allow my motor to tilt. I think it is worth over $150 new. [img size=500]http://www.australianfishing.com.au/media/kunena/attachments/legacy/images/P1010636_AFO-f5058e29f7811eaeea40cbbdf5a777ba.jpg

Post edited by: rayke1938, at: 2007/09/04 14:38

[rayke1938]

another view [img size=500]http://www.australianfishing.com.au/media/kunena/attachments/legacy/images/P1010637_AFO-c93a34debc2876361f0ad5363bc2db43.jpg

[rayke1938]

Please check the measurements in your boat as it takes up a lot of room.There is two adjustable mounting legs that are not shown it the photos. [img size=500]http://www.australianfishing.com.au/media/kunena/attachments/legacy/images/P1010638_AFO.jpg

Post edited by: rayke1938, at: 2007/07/02 15:32

[jeff f]

how does it mount ray,into rod holders or does it use clamps of some sort?

[rayke1938]

Rodholders or any tube around

335 to 45 mm in diameter the arem are filly adjustable for angle and distance apart.here os a piccy of one of the arms.

Post edited by: rayke1938, at: 2007/07/02 18:51

[jeff f]

arrr...one of them newfangled gas powered bait boards..he he he

[rayke1938]

sorry wrong piccy [img size=500]http://www.australianfishing.com.au/media/kunena/attachments/legacy/images/P1010629_AFO-dc5cc839313b601b4ecc37856d0c020e.jpg

[Nastymind]

Mate, I want to buy it. The problem i have is that I`m working tomorrow and leaving town for a holiday on Wednesday. My girlfreind will be home till 4:00pm tomorrow, or I`ll be home after 5:30pm. Are you able to bring it to South Brisbane? Does tomorrow suit you?

Cheers,

[rayke1938]

Sorry mate its pick up only from redland bay if you like i will hold it for you. Let me know.

Ray

[Nastymind]

Nah, that`s ok. Thanks for the offer anyway mate.

[bootyinblue]

If someone can tell me a way to extend the legs and bend them with about a 45 degree bend to get the board high and vertical then I will buy it.

The face I have to mount on in in the motor well and is about a 45-50 degree angle running top bow to bottom stern. I could mount vertical rod holders against it but then it wold require some pretty fancy pipe work for the legs to get the board up and out over the engine.

Any advice.....anyone???

[rayke1938]

Couple of more photos to show range of adjustment of the mounting legs. I have removed one of the adjustment locking bolts to allow me to move one of the legs. [img wrong photo will have another go.

Post edited by: rayke1938, at: 2007/07/03 14:06

[rayke1938]

here it is [img size=500]http://www.australianfishing.com.au/media/kunena/attachments/legacy/images/P1010629_AFO-b51613b51fe097908c4e66432bb0a5c9.jpg

[rayke1938]

Another [img size=500]http://www.australianfishing.com.au/media/kunena/attachments/legacy/images/P1010630_AFO-34070845f0b727627f175eb54c0cf479.jpg

[rayke1938]

The width of the spacing for the mounts is also adjustable but you would have to drill out 4 pop rivets. I also have a length of alumimium tubing that would do to mount the legs in.

Ray [img size=500]http://www.australianfishing.com.au/media/kunena/attachments/legacy/images/P1010631_AFO-01896b0aa382d24dc7cfe798bc9c25aa.jpg

[Nastymind]

Ok mate,

If your keen to hold onto it for a couple of weeks, I'll buy it off you. Just let me know.

Cheers

[rayke1938]

I will hold it for you just give me a ring or pm when you are ready.

Ray

Post edited by: rayke1938, at: 2007/07/03 14:35

[bootyinblue]

Damn.... With the aluminium tubing I am sure 'we' could have come up with a suitable rig for it.

Ohwell, first in, best dressed.