Jump to content

Wr450 relay


freedomhawk12

Recommended Posts

So my wr450 won't kick over? Not even a click, has new battery. Just looking to replace the relay under the seat at the back of the seat, but the relay is missing the amp numbers for each pin, and I'm not sure if the narva 4 pin will suit? Anyone had this problem? Or have a wr from 2003 onwards they might do me the favor of getting the numbers off the relay for me?

Link to comment
Share on other sites

That sounds like the starting circuit cut off relay. it stops you from starting your bike in any other condition than clutch in, or in neutral? Is that the one? If it is I had the same issue with mine heres the part number unless its changed 8DM–81950–00

Link to comment
Share on other sites

Can you push start it. If it does kick to life something like what basstracker has said.

If it doesn't kick try your kill switch, ignition lead, plug. Pretty common problem for bikes going out to the Beer, lots of muddy water going through everything.

Link to comment
Share on other sites

wont kick start, wont push start.

run a wire from the starter positive to the positive on battery, nothing?

put a test light onto the positive on the starter and nothing..

so now its just got confusing haha.

wont jump start the starter, and on the other hand no power getting to the starter.

thanks heaps for your help.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...