Jump to content

Off shore?


dissy

Recommended Posts

Hi Guys,

I've been fishing canals creeks and rivers in my Sea Bird Fisherman 12 yak since christmas and was wondering if it would be capable of going off shore? Seen a few guys went out to brays on the weekend and would love to tag along some time, just not sure if my machine is up to it???

Length: 3.66 m

Width: 76 cm

Depth: 36 cm

Load capacity: 145 kg

Weight: 25 kg

Any ideas guys?

Thanks

Link to comment
Share on other sites

I wouldn't go offshore unless it was fitted with a skirt, too much chance of water entry and no way of getting it out.

You get hit by one good wave going out and you will be full.

Sit on top yaks are the go offshore, so the water can get away.

Link to comment
Share on other sites

I wouldn't go offshore unless it was fitted with a skirt, too much chance of water entry and no way of getting it out.

You get hit by one good wave going out and you will be full.

Sit on top yaks are the go offshore, so the water can get away.

Thanks for the advice Bill, I have done a bit of research and I can get a skirt for my yak. will put it on the shopping list....

Link to comment
Share on other sites

Hey mate,

If you plan on going offshore with the sit-in kayaks it could also be valuable to have a bilge pump (electric/manual whatever is in your budget). Like others have said before, it's a really good idea to have a spray skirt and also be able to utilise some techniques such as a roll or how to get out when you're upside down.


/>http://www.youtube.com/watch?v=oCnugKog1cI

Rob

Link to comment
Share on other sites

Thanks for all the advice guys,

I think the general consenus is a) get a skirt fitted B) buy an electric bilge c) only go out on a flat day.

Thanks again for the offers to tag along, but i'm out of action this weekend.

Cheers, Brent

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...