Stacer 4mt Runabout Boat Seat Covers

[Shoji]

Anyone know about the covers on these seats? Can I buy them somewhere? Or replace the whole seat? The seat post system is the bees knees. But I don't want to change it because it's a seat post that is welded into the hull. Any ideas? Gards, John

[aussie123]

They look like old Stacer seats made back in the mid to late 80's.

Maybe check out the Stacer website or send them an email and see if they have anything suitable these days that will fit.

[Shoji]

Hi aussie123

Had a look on their website. May give them a call direct. nothing on their site.

Yes the boats engine is 1988 but in great nik. Compression good. Have a complete set of kits ready for service.

Would be nice if Stacer had replacement parts for their older boats. We continue...

John

[Drop Bear]

23 hours ago, Shoji said:

Hi aussie123

Had a look on their website. May give them a call direct. nothing on their site.

Yes the boats engine is 1988 but in great nik. Compression good. Have a complete set of kits ready for service.

Would be nice if Stacer had replacement parts for their older boats. We continue...

John

The seats look great. Very retro cool. 

[rayke1938]

Any auto/marine upholsterer would be able to recover Big Tez who used to be on the site would be able to do them .Dostyle brought his boat so may have contact details

Cheers

Ray

Edited May 23, 2019 by rayke1938

[Drop Bear]

1 hour ago, rayke1938 said:

Any auto/marine upholsterer would be able to recover Big Tez who used to be on the site would be able to do them .Dostyle brought his boat so may have contact details

Cheers

Ray

any idea of the cost Ray? 

[rayke1938]

no idea

[Shoji]

Dropped them off to an upholstery place. Blue will be the colour.

Actually the boat is getting a refurb. 2k paint just this morning in front of my spray booth. I will do the outside as well.

https://www.outboardspares.com.au/Are great to deal with and full service kit and carb kit has cost me just $186

Location is Mandurah WA. We have the estuary and great coast fishing. Also will be taking this Stacer down south to Walpole and the Blackwood river at some stage.

[Drop Bear]

On 25/05/2019 at 3:30 PM, Shoji said:

Actually the boat is getting a refurb

looks mint mate. Show us some finished photos when you are done.

Before and after if you have them? 

[Shoji]

Finished the floor carpet and picked up the seats today. All installed and looking good now. getting there now.

Last weekend I installed the kits for the motor. Carb, impeller, plugs and thermostat. I'll start it tomorrow and see if it run's ok. Fingers crossed

[aussie123]

Is that the 414 or 444 hull

[Drop Bear]

16 hours ago, Shoji said:

Finished the floor carpet and picked up the seats today.

looks mint mate. I am assuming you are a Paramatta eels fan? 

 

[Shoji]

Out for test on the water for the first time after a morning of getting it ready. Runs well and starts first time every time. Tweaked the fuel delivery jet a little as it popped and farted a few times. I'm ready for fishing. The outside hull can wait for now. As you can see the fuel tank is very faded from the sun. Replacement needed I think.

This hull is a 4mt Aussie123

I would have said Westcoast Eagles colour. It was by accident DropBear.

[Drop Bear]

Nice mate. well done. great project boat. 

[Shoji]

On the water again today to get to know this boat and motor. I have a small problem. It keeps missing a beat at random. Like it's completely turning off and on again. Did it numerous times at different speeds. Fuel starvation or electrical? Anyone here a problem solver?

Note, I have done the carb kit. And I followed Dangar Marine's youtube video on the same engine. I have extensive carb experience like example, working on my own classic Renault 17 with twin 40 DCOE Weber's. So these Johnson carbs are easy peasy.

[Drop Bear]

11 hours ago, Shoji said:

On the water again today to get to know this boat and motor. I have a small problem. It keeps missing a beat at random. Like it's completely turning off and on again. Did it numerous times at different speeds. Fuel starvation or electrical? Anyone here a problem solver?

Note, I have done the carb kit. And I followed Dangar Marine's youtube video on the same engine. I have extensive carb experience like example, working on my own classic Renault 17 with twin 40 DCOE Weber's. So these Johnson carbs are easy peasy.

Not sure sorry mate but off then on sounds more electric than fuel? What are the plugs and leads like? 

[Shoji]

On the water again today as I got the go ahead from the great powers within the house hold. I'm thinking that it's fuel problem as this miss fire is so random. I say this because if it was electrical I wouldn't be traveling km's on the water and only the odd miss. Being an old  boat and motor I will start at the fuel tank and work up to the carb. The primer doesn't work that great so it could be a fowling of sorts. Something is blocking? Fuel maybe the go so I'll look there.

[aussie123]

Find another portable tank and fuel line and run the motor off that.

This will tell you if it is a fuel issue or electrical issue.

 

[Shoji]

Bought a new fuel tank with complete hose, etc. Old one seemed shite when squeezing the bulb anyway. Probably rubber bits clogging it up. auissie123, I will test once it turns up or when the weather is fine. Marine Warehouse do a good deal with full kit on E Bay.

https://www.ebay.com.au/itm/Outboard-Fuel-Tank-25L-Kit-Johnson-Evinrude-Fuel-Line-Adaptor-25-Litre-2900MC/112918559184?hash=item1a4a7879d0:g:NGgAAOSwAwFaoKiP

 

[Drop Bear]

On 05/06/2019 at 8:52 PM, Shoji said:

Bought a new fuel tank with complete hose, etc. Old one seemed shite when squeezing the bulb anyway. Probably rubber bits clogging it up. auissie123, I will test once it turns up or when the weather is fine. Marine Warehouse do a good deal with full kit on E Bay.

https://www.ebay.com.au/itm/Outboard-Fuel-Tank-25L-Kit-Johnson-Evinrude-Fuel-Line-Adaptor-25-Litre-2900MC/112918559184?hash=item1a4a7879d0:g:NGgAAOSwAwFaoKiP

 

Good one mate. Better safe than sorry. It is a long paddle home. 

[Shoji]

Thanks Drop Bear. It arrived today. It's one of those jaunt tanks. Comes with bracket to fasten to the deck, which I will do. I won't be testing it this weekend. Too busy carting the missus and her girl friend to the wineries on Saturday up the Swan region here in WA. But the weekend weather is not great with rain anyway.

 

[Drop Bear]

On 13/06/2019 at 8:18 PM, Shoji said:

Comes with bracket to fasten to the deck,

Oh I haven't seen that before. how does it work? 

[Shoji]

It's bracket that fits to the floor and it has a rubber band that goes over the top and clips on

 

[Shoji]

Decided to paint the deck and refurb the screen. Replacing the acrylic and painted the frame in two pack. It's winter and every weekend has either been raining or the better half has me something to do other than fishing

[Shoji]

All back together but I've decided to paint the sides now. So all the decals will come off. Not sure about painting the underside yet.

[Drop Bear]

Wow looks mint mate well done. 

That is a clever clip. I will need to get something like that!

[Shoji]

On 31/07/2019 at 5:33 AM, Drop Bear said:

Wow looks mint mate well done. 

That is a clever clip. I will need to get something like that!

Hi Drop Bear. It's part of the tanks injection mould design, so it fits snug within the base to lock it in place. Yes a clever design.

Sides to be painted before I venture out on the blue water.

Keen to get a few skippy out from Mandurah at Madora Bay reef when winter weather permits.

[Drop Bear]

20 hours ago, Shoji said:

Hi Drop Bear. It's part of the tanks injection mould design, so it fits snug within the base to lock it in place. Yes a clever design.

Sides to be painted before I venture out on the blue water.

Keen to get a few skippy out from Mandurah at Madora Bay reef when winter weather permits.

I caught some when I was in WA. Good eating if I remember correctly. 

[Shoji]

3 minutes ago, Drop Bear said:

I caught some when I was in WA. Good eating if I remember correctly. 

These are what I really like. And sushimi style too!

[Drop Bear]

1 hour ago, Shoji said:

These are what I really like. And sushimi style too!

Nice work mate.

Are they the southern black bream? 

I have not tried sashimi bream. I will give it a go thanks for the tip. 

[Shoji]

49 minutes ago, Drop Bear said:

Nice work mate.

Are they the southern black bream? 

I have not tried sashimi bream. I will give it a go thanks for the tip. 

Yes our WA southern black bream.

http://www.fish.wa.gov.au/species/black-bream/Pages/default.aspx

[Drop Bear]

13 hours ago, Shoji said:

Yes our WA southern black bream.

http://www.fish.wa.gov.au/species/black-bream/Pages/default.aspx

Very nice mate. I don't think I have ever caught one. 

[Shoji]

Had a break from the boat of late. But before that I have been refurbishing the transom.

With an engine lift I removed the outboard, just enough to swing away from the transom so I could sand it up ready for painting.

I replaced the back plate with a new one that I coated up with resin. I also cleaned up the outboard of old grease.

Painted the transom in two pack. I also replaced all fasteners with new stainless. Even those two handles got a new thick coating of black two pack.

Only the sides to do now. But all those stickers have to come off which is hours of work

 

[Drop Bear]

On 05/09/2019 at 12:43 PM, Shoji said:

Painted the transom in two pack.

wow looks fantastic.  Great work