Jump to content

BZH

Members
 View Profile  See their activity

  • Posts

    15

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by BZH

  1. BZH
    Thank you
  2. BZH
    ellicat 50%part A polyurethane + % of desire micro balloon (max 15/20 %) 50%part B polyurethane + % of desire micro balloon (max 15/20 %) The percentage of micro balloon on the Part A and on the Part B must be the same The percentage of micro is depending of the buoyancy you desire , and position of the lure in the water you want , you'll have to do your own tests until getting the right position desired , it could be long and you may have to throw away a lot of lure before getting the perfection ( or almost)
  3. BZH
    Thanks for your comments…. as I loved to do my own, and many friends ( and friends of friends) asked me to do some for them …I create à FB page https://www.facebook.com/LDP-lures-104185238081000/
  4. BZH
    Here are The beasts , they were not been catched in Australia
  5. BZH
    Hi Everyones After a long time I'm back ! I'm back to show you the result , after o lot of tests, a lot of mistakes , now they are not so bad ..... Could get opportunity to test my popper on giant GT on many destination , and they work very very fine ! Between 150 and 190 gr Result : 57 kg personnal record
  6. BZH
    yes I need it to float What I did is mixing a part A with micro balloon then when it is OK I add the part B then then mix all together , then pour it in the mold...... I let it for an hour before retrieve it
  7. BZH
    I call it resin but I used 2 part polyurethane... I add 10 % of micro balloon ( I thing is not enough, but if I add more is becoming difficult to do a good mix , and as you said it reduced the working time of the mix considerably ) I used 2 mm stainless steel wire I feel that I m close to reach my target , but something is bad or wrong
  8. BZH
    Thank you Ed for those precisions.... Do you remember how % of micro balloon ? the 2 part polyurethane is 50% / 50% For this size of popper I use treble 4/0 to 5/0
  9. BZH
    Merci Drop Bear Meribel is very nice for Skiing In France the Bar which is at maximum can reach 5 to 6 kg , but average is 1 to 3 kg And now since fews years we target the red tuna , which can reach 300 kg , but very watched by authorities..... in french loupe is a magnifying glass Australia is a bit far away from france for fishing (but I already been there in 1990 , Sydney, Adelaide an d Tasmania also)
  10. BZH
    Hi Drop Bear Thanks for your answer I would to do some Popper like Heru Cubera (resin) To put sinker I need to get a floating popper , and this is not the case Today the popper I have done are , are floating but as soon I install on it both treble it sink....... (and there is still no lead in ) and I dont thing I can had more "bubble powder" to increase floating , so I can t had sinkers because it is already sinking without it
  11. BZH
    I just want some help to do mine (not for business) , just for fun
  12. BZH
    Red Snapper in french : Carpe Rouge In Spanish : Cubera
  13. BZH
    better than pictures see the videos
  14. BZH
    Hello I m trying to do my own GT resin popper. The only problem I have is for the buoyancy....... How do you do to get the right floating and then the right balancing ? Thanks (sorry for my bad English)
  15. BZH
    Hi everybody I m BZH from France I go fishing everywhere in the world ( Gabon , Venezuela, Costa Rica, Columbia, Djibouti.... and of course France), my next fishing travel could be Oman but not sure yet.... My favorite fishes are GT and Tarpon I try to do my own lure , but it is not a big success yet
×
×
  • Create New...