Jump to content

Rob Birnie

Members
  • Posts

    6
  • Joined

  • Last visited

Posts posted by Rob Birnie

  1. Just an update. Ended up cleaning the carby and replacing with a carby repair kit. There was a problem with the float which wasn't cutting fuel off and causing the carby to overflow. Fixed this issue and it seemed to be better but the outboard still won't idle great and will shut off. Does this sounds like a CDI problem or something else fuel/ cafby related? 

  2. 20 minutes ago, ellicat said:

    Apart from the carby, it could be the ignition leads.

    Could also be fuel related -  split hose; breather valve not open on the tank; split primer bulb; water in fuel (assuming you don't have a filter).

    That's my level of diagnostics, sorry. Hopefully one of the more experienced members will have some other options for you to look at.

    I was going to check the ignition after carby clean out and replace the black ignition box. Seems to be getting fuel okay from the tank so thinking if it is fuel related its around the carby. Thank you for your help! 

  3. I have a 2 stroke Yamaha 30hp CV longshaft that has some issues at the moment.

    It will start okay first go but will only run on high revs and won't idle good. It runs on high revs for a bit but will eventually shut off. Once it shuts off it won't start again. 

    Can I get any recommendations on any issues it could be? I have changed the spark plugs and about to clean out the carby. Any other suggestions would be greatly appreciated 

×
×
  • Create New...