Shoji

Had a break from the boat of late. But before that I have been refurbishing the transom.
With an engine lift I removed the outboard, just enough to swing away from the transom so I could sand it up ready for painting.
I replaced the back plate with a new one that I coated up with resin. I also cleaned up the outboard of old grease.
Painted the transom in two pack. I also replaced all fasteners with new stainless. Even those two handles got a new thick coating of black two pack.
Only the sides to do now. But all those stickers have to come off which is hours of work
 

Had a break from the boat of late. But before that I have been refurbishing the transom.
With an engine lift I removed the outboard, just enough to swing away from the transom so I could sand it up ready for painting.
I replaced the back plate with a new one that I coated up with resin. I also cleaned up the outboard of old grease.
Painted the transom in two pack. I also replaced all fasteners with new stainless. Even those two handles got a new thick coating of black two pack.
Only the sides to do now. But all those stickers have to come off which is hours of work
 

Yes our WA southern black bream.
http://www.fish.wa.gov.au/species/black-bream/Pages/default.aspx

These are what I really like. And sushimi style too!

I caught some when I was in WA. Good eating if I remember correctly. 

Hi Drop Bear. It's part of the tanks injection mould design, so it fits snug within the base to lock it in place. Yes a clever design.
Sides to be painted before I venture out on the blue water.
Keen to get a few skippy out from Mandurah at Madora Bay reef when winter weather permits.

Hi Drop Bear. It's part of the tanks injection mould design, so it fits snug within the base to lock it in place. Yes a clever design.
Sides to be painted before I venture out on the blue water.
Keen to get a few skippy out from Mandurah at Madora Bay reef when winter weather permits.

All back together but I've decided to paint the sides now. So all the decals will come off. Not sure about painting the underside yet.

Decided to paint the deck and refurb the screen. Replacing the acrylic and painted the frame in two pack. It's winter and every weekend has either been raining or the better half has me something to do other than fishing

It's bracket that fits to the floor and it has a rubber band that goes over the top and clips on

 

All back together but I've decided to paint the sides now. So all the decals will come off. Not sure about painting the underside yet.

Decided to paint the deck and refurb the screen. Replacing the acrylic and painted the frame in two pack. It's winter and every weekend has either been raining or the better half has me something to do other than fishing

Thanks Drop Bear. It arrived today. It's one of those jaunt tanks. Comes with bracket to fasten to the deck, which I will do. I won't be testing it this weekend. Too busy carting the missus and her girl friend to the wineries on Saturday up the Swan region here in WA. But the weekend weather is not great with rain anyway.
 

Thanks Drop Bear. It arrived today. It's one of those jaunt tanks. Comes with bracket to fasten to the deck, which I will do. I won't be testing it this weekend. Too busy carting the missus and her girl friend to the wineries on Saturday up the Swan region here in WA. But the weekend weather is not great with rain anyway.
 

Thanks Drop Bear. It arrived today. It's one of those jaunt tanks. Comes with bracket to fasten to the deck, which I will do. I won't be testing it this weekend. Too busy carting the missus and her girl friend to the wineries on Saturday up the Swan region here in WA. But the weekend weather is not great with rain anyway.
 

Good one mate. Better safe than sorry. It is a long paddle home. 

Bought a new fuel tank with complete hose, etc. Old one seemed shite when squeezing the bulb anyway. Probably rubber bits clogging it up. auissie123, I will test once it turns up or when the weather is fine. Marine Warehouse do a good deal with full kit on E Bay.
https://www.ebay.com.au/itm/Outboard-Fuel-Tank-25L-Kit-Johnson-Evinrude-Fuel-Line-Adaptor-25-Litre-2900MC/112918559184?hash=item1a4a7879d0:g:NGgAAOSwAwFaoKiP
 

Find another portable tank and fuel line and run the motor off that.
This will tell you if it is a fuel issue or electrical issue.
 

On the water again today as I got the go ahead from the great powers within the house hold. I'm thinking that it's fuel problem as this miss fire is so random. I say this because if it was electrical I wouldn't be traveling km's on the water and only the odd miss. Being an old  boat and motor I will start at the fuel tank and work up to the carb. The primer doesn't work that great so it could be a fowling of sorts. Something is blocking? Fuel maybe the go so I'll look there.

On the water again today as I got the go ahead from the great powers within the house hold. I'm thinking that it's fuel problem as this miss fire is so random. I say this because if it was electrical I wouldn't be traveling km's on the water and only the odd miss. Being an old  boat and motor I will start at the fuel tank and work up to the carb. The primer doesn't work that great so it could be a fowling of sorts. Something is blocking? Fuel maybe the go so I'll look there.

On the water again today to get to know this boat and motor. I have a small problem. It keeps missing a beat at random. Like it's completely turning off and on again. Did it numerous times at different speeds. Fuel starvation or electrical? Anyone here a problem solver?
Note, I have done the carb kit. And I followed Dangar Marine's youtube video on the same engine. I have extensive carb experience like example, working on my own classic Renault 17 with twin 40 DCOE Weber's. So these Johnson carbs are easy peasy.

On the water again today to get to know this boat and motor. I have a small problem. It keeps missing a beat at random. Like it's completely turning off and on again. Did it numerous times at different speeds. Fuel starvation or electrical? Anyone here a problem solver?
Note, I have done the carb kit. And I followed Dangar Marine's youtube video on the same engine. I have extensive carb experience like example, working on my own classic Renault 17 with twin 40 DCOE Weber's. So these Johnson carbs are easy peasy.

Dropped them off to an upholstery place. Blue will be the colour.
Actually the boat is getting a refurb. 2k paint just this morning in front of my spray booth. I will do the outside as well.
https://www.outboardspares.com.au/Are great to deal with and full service kit and carb kit has cost me just $186
Location is Mandurah WA. We have the estuary and great coast fishing. Also will be taking this Stacer down south to Walpole and the Blackwood river at some stage.

Out for test on the water for the first time after a morning of getting it ready. Runs well and starts first time every time. Tweaked the fuel delivery jet a little as it popped and farted a few times. I'm ready for fishing. The outside hull can wait for now. As you can see the fuel tank is very faded from the sun. Replacement needed I think.
This hull is a 4mt Aussie123
I would have said Westcoast Eagles colour. It was by accident DropBear.

Out for test on the water for the first time after a morning of getting it ready. Runs well and starts first time every time. Tweaked the fuel delivery jet a little as it popped and farted a few times. I'm ready for fishing. The outside hull can wait for now. As you can see the fuel tank is very faded from the sun. Replacement needed I think.
This hull is a 4mt Aussie123
I would have said Westcoast Eagles colour. It was by accident DropBear.