BZH
-
Posts
15 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Store
Downloads
Blogs
Gallery
Events
Videos Directory
Posts posted by BZH
-
-
ellicat
50%part A polyurethane + % of desire micro balloon (max 15/20 %)
50%part B polyurethane + % of desire micro balloon (max 15/20 %)
The percentage of micro balloon on the Part A and on the Part B must be the same
The percentage of micro is depending of the buoyancy you desire , and position of the lure in the water you want , you'll have to do your own tests until getting the right position desired , it could be long and you may have to throw away a lot of lure before getting the perfection ( or almost)
-
Thanks for your comments….
as I loved to do my own, and many friends ( and friends of friends) asked me to do some for them …I create à FB page
- ellicat and AUS-BNE-FISHO
- 2
-
- Popular Post
- Popular Post
- ellicat, Old Scaley, AUS-BNE-FISHO and 3 others
- 5
- 1
-
- Popular Post
- Popular Post
Hi Everyones
After a long time I'm back !
I'm back to show you the result , after o lot of tests, a lot of mistakes , now they are not so bad ..... Could get opportunity to test my popper on giant GT on many destination , and they work very very fine !
Between 150 and 190 gr
Result : 57 kg personnal record
-
-
I call it resin but I used 2 part polyurethane...
I add 10 % of micro balloon ( I thing is not enough, but if I add more is becoming difficult to do a good mix , and as you said it reduced the working time of the mix considerably )
I used 2 mm stainless steel wire
I feel that I m close to reach my target , but something is bad or wrong
-
-
Merci Drop Bear
Meribel is very nice for Skiing
In France the Bar which is at maximum can reach 5 to 6 kg , but average is 1 to 3 kg
And now since fews years we target the red tuna , which can reach 300 kg , but very watched by authorities.....
in french loupe is a magnifying glass
Australia is a bit far away from france for fishing (but I already been there in 1990 , Sydney, Adelaide an d Tasmania also)
-
Hi Drop Bear
Thanks for your answer
I would to do some Popper like Heru Cubera (resin)
To put sinker I need to get a floating popper , and this is not the case
Today the popper I have done are , are floating but as soon I install on it both treble it sink....... (and there is still no lead in )
and I dont thing I can had more "bubble powder" to increase floating , so I can t had sinkers because it is already sinking without it
-
-
-
-
-
Hi everybody
I m BZH from France
I go fishing everywhere in the world ( Gabon , Venezuela, Costa Rica, Columbia, Djibouti.... and of course France), my next fishing travel could be Oman but not sure yet....
My favorite fishes are GT and Tarpon
I try to do my own lure , but it is not a big success yet
Resin Popper Homemade
in Tackle, Rods and Reels
Posted
Thank you