BZH

ellicat 
50%part A polyurethane + % of desire micro balloon (max 15/20 %)
50%part B polyurethane + % of desire micro balloon (max 15/20 %)
 
The percentage of micro balloon on the Part A and on the Part B must be the same 
The percentage of micro is depending of the buoyancy you desire , and position of the lure in the water you want , you'll have to do your own tests until getting the right position desired , it could be long and you may have to throw away a lot of lure before getting the perfection ( or almost) 

Here are The beasts , they were not been catched in Australia 

Hi Everyones
After a long time I'm back !
I'm back to show you the result , after o lot of tests, a lot of mistakes , now they are not so bad ..... Could get opportunity to test my popper on giant GT on many destination , and they work very very fine !
Between 150 and 190 gr 
 
Result : 57 kg personnal  record 
 

Hi Everyones
After a long time I'm back !
I'm back to show you the result , after o lot of tests, a lot of mistakes , now they are not so bad ..... Could get opportunity to test my popper on giant GT on many destination , and they work very very fine !
Between 150 and 190 gr 
 
Result : 57 kg personnal  record 
 

ellicat 
50%part A polyurethane + % of desire micro balloon (max 15/20 %)
50%part B polyurethane + % of desire micro balloon (max 15/20 %)
 
The percentage of micro balloon on the Part A and on the Part B must be the same 
The percentage of micro is depending of the buoyancy you desire , and position of the lure in the water you want , you'll have to do your own tests until getting the right position desired , it could be long and you may have to throw away a lot of lure before getting the perfection ( or almost) 

ellicat 
50%part A polyurethane + % of desire micro balloon (max 15/20 %)
50%part B polyurethane + % of desire micro balloon (max 15/20 %)
 
The percentage of micro balloon on the Part A and on the Part B must be the same 
The percentage of micro is depending of the buoyancy you desire , and position of the lure in the water you want , you'll have to do your own tests until getting the right position desired , it could be long and you may have to throw away a lot of lure before getting the perfection ( or almost) 

ellicat 
50%part A polyurethane + % of desire micro balloon (max 15/20 %)
50%part B polyurethane + % of desire micro balloon (max 15/20 %)
 
The percentage of micro balloon on the Part A and on the Part B must be the same 
The percentage of micro is depending of the buoyancy you desire , and position of the lure in the water you want , you'll have to do your own tests until getting the right position desired , it could be long and you may have to throw away a lot of lure before getting the perfection ( or almost) 

Thanks for your comments….
as I loved  to do my own, and many friends ( and friends of friends) asked me to do some for them …I create à FB page 
https://www.facebook.com/LDP-lures-104185238081000/

Thanks for your comments….
as I loved  to do my own, and many friends ( and friends of friends) asked me to do some for them …I create à FB page 
https://www.facebook.com/LDP-lures-104185238081000/

Here are The beasts , they were not been catched in Australia 

Here are The beasts , they were not been catched in Australia 

Here are The beasts , they were not been catched in Australia 

Here are The beasts , they were not been catched in Australia 

Here are The beasts , they were not been catched in Australia 

Hi Everyones
After a long time I'm back !
I'm back to show you the result , after o lot of tests, a lot of mistakes , now they are not so bad ..... Could get opportunity to test my popper on giant GT on many destination , and they work very very fine !
Between 150 and 190 gr 
 
Result : 57 kg personnal  record 
 

Hi Everyones
After a long time I'm back !
I'm back to show you the result , after o lot of tests, a lot of mistakes , now they are not so bad ..... Could get opportunity to test my popper on giant GT on many destination , and they work very very fine !
Between 150 and 190 gr 
 
Result : 57 kg personnal  record 
 

Hi Everyones
After a long time I'm back !
I'm back to show you the result , after o lot of tests, a lot of mistakes , now they are not so bad ..... Could get opportunity to test my popper on giant GT on many destination , and they work very very fine !
Between 150 and 190 gr 
 
Result : 57 kg personnal  record 
 

Hi Everyones
After a long time I'm back !
I'm back to show you the result , after o lot of tests, a lot of mistakes , now they are not so bad ..... Could get opportunity to test my popper on giant GT on many destination , and they work very very fine !
Between 150 and 190 gr 
 
Result : 57 kg personnal  record 
 

yes I need it to float
What I did is mixing a part A with micro balloon then when it is OK I add the part B then then mix all together , then pour it in the mold...... I let it for an hour before retrieve it

better than pictures see the videos
 

I call it resin but I used 2 part polyurethane...
I add 10 % of micro balloon ( I thing is not enough, but if I add more is becoming difficult to do a good mix , and as you said it  reduced the working time of the mix considerably )
I used 2 mm stainless steel wire
I feel that I m close to reach my target , but something is bad or wrong

Thank you Ed for those precisions....
Do you remember how % of micro balloon ?
the 2 part polyurethane is 50% / 50%
For this size of popper I use treble 4/0 to 5/0

Hi Drop Bear
Thanks for your answer
I would to do some Popper like Heru Cubera (resin)
To put sinker I need to get a floating popper , and this is not the case
Today the popper I have done are , are floating but as soon I install on it both treble it sink....... (and there is still no lead in )
and I dont thing I can had more "bubble powder" to increase floating , so I can t  had sinkers because it is already sinking without it 😫

Merci Drop Bear
Meribel is very nice for Skiing
In France the Bar which is at maximum can reach 5 to 6 kg , but average is 1 to 3 kg
And now since fews years we target the red tuna , which can reach 300 kg , but very watched by authorities.....
in french loupe is a magnifying glass
 
Australia is a bit far away from france for fishing (but I already been there in 1990 , Sydney, Adelaide an d Tasmania also)

Hello
I m trying to do my own GT resin popper.
The only problem I have is for the buoyancy.......
How do you do to get the right floating and then the right balancing ?
 
Thanks
 
(sorry for my bad English)🙄