Jump to content

Old Scaley

Club Member
  • Posts

    4,170
  • Joined

  • Last visited

  • Days Won

    53

Posts posted by Old Scaley

  1. Just a note of caution for future trolling motor purchasers.  Turns out you should always disconnect your motor from the battery when not in use. 

    My usual routine is to disconnect the Anderson plugs that I have above the deck when I come off the water and then plug the smart charger in after I finish cleaning the boat so I am good to go at short notice. Lat time I had the boat in the water was a week before I went away for a few weeks and I forgot to unplug the motor and didn’t put the charger on because I knew I wouldn’t use the boat for at least a month. When I got home I plugged the charger in and saw it was registering 2.7v.  The motor must draw a small amount of juice even when stowed. Against all hope, I left the charger on for more than a week and only achieved 7.0v so I have now pronounced the trusty 3 year old Century Deep Cycle dead. 

    Now looking at a replacement.  I don’t need (and can’t justify) to spend big bucks on a lithium. I see that Supercheap have 105ah agm for $299. Brand is XTM.  Anyone had any experience with that brand or have a better suggestion, bearing in mind that I am not Rockerfeller?

  2. 3 hours ago, mzaakir said:

    try the new baitjunkie jigheads, ive been using them and they stop that problem completely the only problem with them is that if you want to change plastic its hard to take the plastic off without ripping it so best bet just to take out a new jighead 

    Thanks for the tip, but I don’t think I will buy jig heads specifically for one brand of plastic. Hope that they aren’t over-packaged or over-priced for those who do use them.

  3. 1 hour ago, AUS-BNE-FISHO said:

    RMG Scorpion 35 in Golden Green for bass or 3.2 inch Baitjunkie minnow in Motor Oil for flathead. 

    Hey Hamish, do you find the baitjunkies slide down the jig head too easily? I have been trying them recently. They look the goods but are overpriced and over packaged as well as being hard to keep on the jig head properly. Maybe it’s just me?

×
×
  • Create New...