Jump to content

Maximun capacity labels.


shortie

Recommended Posts

Capacity labels

Overloading is dangerous and one of the easiest ways to capsize your boat. The more weight in the boat, the lower the freeboard. Freeboard is the minimum vertical distance from the surface of the water to the gunwale. The gunwale is the upper edge of an open boat. Overloading compromises the safety of everyone on board and increases the chance of swamping or capsizing.

When preparing for a trip, the boat operator is responsible for assessing the load on board, both people and objects.

Heavy items should be stowed in a low and central place where they cannot move around.

Weight, including passengers, should be distributed evenly through the boat.

The weight of extra fuel and water should be taken into account.

By applying a capacity label you will have a constant reminder of how many people can be safely on board your boat in smooth waters and good conditions.

All registerable recreational boats, with the exception of sailing ships, must have one or more capacity labels attached. Capacity labels should be placed near the boat's control area/s where they can be seen by the operator at all times. A penalty could apply if a capacity label is not attached, unreadable or located in the wrong position on the boat.

There are three different capacity labels available:

powered boats under six metres

powered boats six metres and over

powered boats with a flybridge.

The operator must keep in mind that the label indicates the number of people the boat can safely carry in good conditions and smooth waters. When using the boat in partially smooth or open waters or in rough conditions the operator should consider reducing the number of people taken on the trip.

Queensland Transport customer service centres can provide a capacity label when registering or transferring the registration of a boat. Capacity labels are free.

Free from here if anyone needs 1.
/>http://www.msq.qld.gov.au/Home/Safety/Capacity_labels/

Link to comment
Share on other sites

What always amuses me about capacity labels is that they are at least \1 person less than the builders plate for the same size boat!

EG, my old clunker at 4.9m gets 5 according to QT (between 4.5 and 5m long), so thats what is on my capacity label. But many boats under 4.5m have 5 on their builders plates!

If your builders plate is visible from the "driving area" you dont need a capacity label, and the builders plate over rides the QT rules used for numbers on capacity labels.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...