Jump to content

Humming bird pirahna 215 max fitment to profish 45


kriso

Recommended Posts

Hey fella's

spent some time on the yak gettin it ready for the hinze trip!

i bought a sounder off ebay for around $130 landed if i rember correctly. was fitting it today and thought i would take some pics to show how i did it. first photo is the transducer hole on the profish. [img size=374]http://www.australianfishing.com.au/media/kunena/attachments/legacy/images/transducer_hole_AFO.jpg

post-1088-144598457921_thumb.jpg

Link to comment
Share on other sites

you then need a good sealent with adhesive properties, dont use ultra grey cause its a gasket purpose only sealant and wont work to well, the best for this is sikaflex pro. you can choose what colour you want then i used grey cause my yak is grey and white! [img size=500]http://www.australianfishing.com.au/media/kunena/attachments/legacy/images/sikaflex_AFO.jpg

post-1088-144598457928_thumb.jpg

Link to comment
Share on other sites

flip the yak over, it helps to make a prop that fits in the well that holds the tranducer cable putting pulling pressure on it to help it seal and stick i used a piece of cork blok that i put a hole in with a slot so when pushed in the hole created a tight grip, then i added sealent around it to stop water coming up. [img size=500]http://www.australianfishing.com.au/media/kunena/attachments/legacy/images/cork_bung_AFO.jpg

post-1088-144598457935_thumb.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...