Jump to content

It looks good, but.....


Gary_C

Recommended Posts

Stu, pretty sure the relay is still in there unless the relay that came with the lights I bought just happens to look exactly like an existing part in the jeep (so very very possible since I know NOTHING about the electrical side of vehicles).

Neal and Beau, if you can track down the wiring diagrams I'd be grateful. And yes, I tried it with the high beams and everything else.

There are a lot of mysterious cut wires hanging around in there, so I've got no clue what the guy thought he was doing....

Link to comment
Share on other sites

thats how i wired mine, so the relay can only get power when the high beam is on. don't want any attention from the boys in blue.

here's the diagram i went off gary, except on it they have the relay getting a signal from the headlight power, not the high beam. it was pretty straight forward, just use a multimeter to find which wire in the back of your headlight only has 12v when the high beam is on. mine was blue with yellow stripe, but i'm sure the jeep is different.

post-7046-14459885246_thumb.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...